The Causes and How To Avoid Brake Failure in cars – One of the causes of road accidents, is due to the malfunction of the brakes of the car. In fact, this component is prepared by automotive manufacturers to be able to reduce the speed, and even make the vehicle stop.
This component will work when the driver’s foot begins to step on the brake pedal. The ability to withstand the speed of the vehicle, usually adjusted to the pressure given by the user.
Causes of brake failure in cars
Lack of brake fluid
The most common cause of brake faults is the problem with brake oil. It’s like brake oil running out, because the owner of the car neglects to fill it.
Water vapor factor
Or the influx of air in the circulation of brake oil can cause oxidation and produce moisture that will evaporate during heat and make the pressure of brake oil decrease.
Poor quality of brake oil
Poor quality of brake oil due to affected temperature or expiration can be a cause. Cars that are old enough can also have sludge deposits in the brake system that can clog and cause the brakes to fail.
Including the appearance of rust in brake devices made of iron so as to damage the chemical compounds of brake oil and cause sludge deposits.
Rubber hoses are no longer flexible and break when receiving heavy pressure. Wear-out brakes, freeze calipers, brake pistons or cylinder master piston seals damaged due to overuse can also trigger car brakes to fail.
Frequently step on the pedal for a long time
Continuously stepping on the brake pedal for a long time turns out to cause fail. This is due to the continuous friction force between the foot and the pedal and the resulting heat caliper. This hot caliper is what can make the brakes collapse.
How To Avoid Brake Failure
There are some automobile tips that can be done by the driver so that the brake components, can withstand the maximum speed of the car.
Do not press on the brake pedal continuously
First, make sure the driver of the car does not press on the brake pedal continuously or over a long period of time. Because, this way can produce heat energy due to friction force stored in the brake times. So it has the potential to make the brakes fail to operate, when needed in an emergency.
Avoid forcing full brakes on steep downhill roads
The next tip How To Avoid Brake Failure is avoid forcing brakes on steep downhill roads.
Avoid forcing full brakes on steep downhill roads and it is recommended to take advantage of the engine brake by lowering the position of the transmission gear.
Lower the speed of the car when going through a wet road
Brakes can’t work optimally when it rains or the road gets wet. Therefore, immediately lower the speed of the car when going through a wet road.
Take a break
The next tip How To Avoid Brake Failure is Take a break.
Take a break when traveling long distances, at least once every 3 hours to give the brake system a chance to release heat.
Top 11 car fire causes
In addition to automotive tips when using, car owners are advised not to forget to carry out periodic maintenance of these vital components. The easiest way is to make sure the volume of oil in the tube does not reach the minimum position.
Immediately add if less brake oil in accordance with the manufacturer’s recommendations. Also check around the tube to make sure there is no potential leakage, especially around the hose connection. In addition, check the condition of the car when the parking brake indicator continues to turn on, even if the lever has been lowered.
Do not delay to replace the brake pads, if it is recommended by a mechanic or a subscription repair shop. Also check the condition of discs or brake drum, when carrying out periodic maintenance in accordance with the manual of the use of vehicles.